EasyManua.ls Logo

D-Link DWL-3500AP

D-Link DWL-3500AP
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format no macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr> and <vlanid>. You must specify the <macaddr> parameter as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid> parameter must
identify a valid VLAN.
Format
macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr> and VLAN of <vlanid>. You must specify the <macaddr> parameter as
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid> parameter must identify a valid VLAN.
Format
no macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If
you select
<all>, all the Static MAC Filters in the system are displayed. If you supply a value
for
<macaddr>, you must also enter a value for <vlanid>, and the system displays Static
MAC Filter information only for that MAC address and VLAN.
Format
show mac-address-table static {<macaddr> <vlanid> | all}
Mode Privileged EXEC
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Source Port(s) The source port filter set's slot and port(s).
show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database
(MFDB) table.
Format
show mac-address-table staticfiltering
Mode Privileged EXEC
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are sep-
arated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.

Table of Contents

Other manuals for D-Link DWL-3500AP

Related product manuals