D-Link DWL-3500AP

Access Point Profile RF Commands 177
4 Wireless Commands
Default 10 Beacons
Format
dtim-period <1-255>
Mode AP Profile Radio Config
1-255 Number of beacons between DTIMs.
no dtim-period
The no version of this command configures the DTIM period to the default value.
Format
no dtim-period
Mode AP Profile Radio Config
fragmentation-threshold
This command configures the fragmentation threshold for the radio. The fragmentation
threshold indicates a limit on the size of packets that can be fragmented. A threshold of 2346
indicates there should be no fragmentation.
Default 2346 (no fragmentation)
Format
fragmentation-threshold <256-2346>
Mode AP Profile Radio Config
256-2346 Fragmentation threshold for the radio, even values
no fragmentation-threshold
The no version of this command configures the fragmentation threshold to the default value.
Format
no fragmentation-threshold
Mode AP Profile Radio Config
rts-threshold
This command configures the RTS threshold for the radio. This indicates the number of octets
in an MPDU, below which an RTS/CTS handshake shall not be performed.
Default 2347
Format
rts-threshold <0-2347>
Mode AP Profile Radio Config
0-2347 RTS threshold for the radio
no rts-threshold
The no version of this command configures the RTS threshold to the default value.
Format
no rts-threshold