258 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
show version
This command displays inventory information for the switch.
NOTE: The show version command will replace the show hardware command in
future releases of the software.
Format
show version
Mode Privileged EXEC
Switch Description Text used to identify the product name of this switch.
Machine Type The machine model as defined by the Vital Product Data.
Machine Model The machine model as defined by the Vital Product Data.
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Part Number Manufacturing part number.
Maintenance Level Hardware changes that are significant to software.
Manufacturer Manufacturer descriptor field.
Burned in MAC Address Universally assigned network address.
Software Version The release.version.revision number of the code currently running on the
switch.
Operating System The operating system currently running on the switch.
Network Processing Device The type of the processor microcode.
Additional Packages The additional packages incorporated into this system.
show interface
This command displays a summary of statistics for a specific interface or a count of all CPU
traffic based upon the argument.
Format
show interface {<slot/port> | switchport}
Mode Privileged EXEC
The display parameters, when the argument is
<slot/port>, is as follows:
Packets Received Without Error The total number of packets (including broadcast packets
and multicast packets) received by the processor.
Packets Received With Error The number of inbound packets that contained errors prevent-
ing them from being deliverable to a higher-layer protocol.
Broadcast Packets Received The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Error The total number of packets transmitted out of the
interface.
Transmit Packets Errors The number of outbound packets that could not be transmitted
because of errors.
To Next Page
Loading...
