Figure 3 - 35 IGMP Snooping Router IP Settings – Edit window
IGMP Snooping Rate Limit Settings
This table allows the user to configure the rate of IGMP snooping control packets that are allowed per port or VLAN.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Rate Limit Settings as shown below:
Figure 3 - 36 IGMP Snooping Rate Limit Settings window
The following parameters can be configured:
Parameter Description
Port List
Specifies a port or range of ports that will be configured.
VLAN List
Specifies a VLAN or range of VLANs that will be configured.
Rate Limit (1-1000)
Configures the rate of IGMP control packets that are allowed per port or VLAN. Tick the No
Limit check box for unlimited rate.
Click Apply to implement changes made.
To Next Page
Loading...
Need help?
General