The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally on the Switch.
Interval
(1-2147483647 sec)
The time in seconds between notifications.
History Size
(1-500)
The maximum number of entries listed in the history log used for notification. Up to 500
entries can be specified.
Click Apply to implement changes.
MAC Notification Port Settings
To configure the MAC Notification Port Settings for the Switch, click Configuration > M AC N otification S ettings >
MAC Notification Port Settings
Figure 2 - 34 MAC Notification Port Settings window
The following parameters may be modified:
Parameter Description
From Port / To
Port
Select a port or group of ports to enable for MAC notification using the pull-down menus.
State
Enable MAC Notification for the ports selected using the pull-down menu.
Click Apply to implement changes.
To Next Page
Loading...
Need help?
General