DHCP Snooping Entries
This table is used to view dynamic entries on specific ports. To view particular port settings, enter the port number and
click Find. To view all entries click View All, and to delete an entry, click Clear.
To view this window click, Security > IP-MAC-Port Binding > DHCP Snooping Entries
Figure 6 - 7 DHCP Snooping Entries window
MAC Block List
This table is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions. To find an
unauthorized device that has been blocked by the IP-MAC binding restrictions, enter the VID and MAC Address in the
appropriate fields and click Find. To delete an entry, click the delete button next to the entry’s port. To delete all the
entries in the Blocked Address Browser window, click Clear All.
To view this window click, Security > IP-MAC-Port Binding > MAC Block List
Figure 6 - 8 MAC Blocked List window
Port Security
Port Security Settings
A given ports’ (or a range of ports') dynamic MAC address learning can be locked such that the current source MAC
addresses entered into the MAC address forwarding table can not be changed once the port lock is enabled. Setting
the Admin State pull-down menu to Enabled, and clicking Apply can lock the port.
Port Security is a security feature that prevents unauthorized computers (with source MAC addresses) unknown to the
Switch prior to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the
network.
To view the following window click, Security > Port Security > Port Security Settings
To Next Page
Loading...
Need help?
General