both get a reply. When the virtual IP is set to 0.0.0.0 the fuction will be disabled. To ensure
that this fuction works correctly, the virtual IP address must not have an IP address that exists
on the subnet.
Redirection Path
Enter a redirection path that the client will be redirected to after successful authentication.
When the string is cleared, the client will not be redirected to another URL after successful
authentication.
RADIUS
Authorization
Specifies to Enable or Disable RADIUS Authorization.
Local Authorization
Specifies to Enable or Disable Loacl Authorization.
Click Apply to implement changes made.
NOTE: To enable the Web-based Access Control function, the redirection path field must have
the URL of the website that users will be directed to once they enter the limited resource, pre-
configured VLAN. Users who attempt to Apply settings without the Redirection Page field set
will be prompted with an error message and Web-based Access Control will not be enabled.
The URL should follow the form http(s)://www.dlink.com
NOTE: The subnet of the IP address of the authentication VLAN must be the same as that of
the client, or the client will always be denied authentication.
NOTE: A successful authentication should direct the client to the stated web page. If the client
does not reach this web page, yet does not receive a Fail! message, the client will already be
authenticated and therefore should refresh the current browser window or attempt to open a
different web page.
Web-based Access Control User Settings
To configure the Switch for Web-based Access Control User Settings, open the Security > Web A uthenication >
Web-based Access Control User Settings
Figure 6 - 45 Web-based Access Control User Settings window
Parameter Description
User Name
Enter the username of up to 15 alphanumeric characters of the guest wishing to access the
web through this process. This field is for administrators who have selected local as their web
based authenticator.
VLAN Name /
VLAN ID (1-4094)
Click the radio button and enter the VLAN name / VLAN ID of a previously configured VLAN
to which successfully authenticated web user will be mapped.
To Next Page
Loading...
Need help?
General