Terminate Cause
The reason for the session termination. There are eight possible reasons for termination.
1) Supplicant Logoff
2) Port Failure
3) Supplicant Restart
4) Reauthentication Failure
5) AuthControlledPortControl set to ForceUnauthorized
6) Port re-initialization
7) Port Administratively Disabled
8) Not Terminated Yet
UserName
The User-Name representing the identity of the Supplicant PAE.
Authenticator Diagnostics
This window contains the diagnostic information regarding the operation of the Authenticator associated with each
port. An entry appears in this table for each port that supports the Authenticator function.
To view the Authenticator D iagnostics window, click Monitoring > P ort Access C ontrol > Authenticator
Diagnostics
Figure 8 - 22 Authenticator Diagnostics window
The following fields can be viewed:
Parameter Description
Port
The identification number assigned to the Port by the System in which the Port resides.
Connect Enter
Counts the number of times that the state machine transitions to the CONNECTING state
from any other state.
Connect LogOff
Counts the number of times that the state machine transitions from CONNECTING to
To Next Page
Loading...
Need help?
General