Figure 6 - 56 Multiple Authentication Settings window
Guest VLAN
This window is used to display and configure the Guest VLAN settings on the Switch.
To view this window, click Security > Multiple Authentication > Guest VLAN, as shown below:
Figure 6 - 57 Guest VLAN window
The following parameters may be set:
Parameter Description
VLAN Name /
VLAN ID (1-4094)
Click the radio button and enter the VLAN name / VLAN ID of a previously configured VLAN to
which the failed authenticated web users will be allocated.
Port List (e.g.:1,6-9) Enter the port or list of ports you wish to configure. Check the Select All Ports check box to
select all ports.
Operation
Select the operation you wish to apply to the Guest VLAN.
Select Create VLAN to have a new VLAN, Add Ports to add a port to the Guest VLAN portlist,
or Delete Ports to remove ports from the Guest VLAN portlist.
Click Apply to implement changes made.
To Next Page
Loading...
Need help?
General