D-Link xStack DES-3528 Series User Manual

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
187
To view this window, click Security > 802.1X > 802.1X Global Settings as shown below:
Figure 6 - 22 802.1X Global Settings window
This window allows you to set the following features:
Parameter Description
Authentication
Mode
The Auth Mode allows the user to choose among, Disabled, Port Based or MAC Based
Authentication Mode. When choosing MAC Based, Host-Based Network Access Control will be
enabled on the port.
Authentication
Protocol
Choose the Auth Protocol either RADIUS EAP or Local.
Forward EAPOL
PDU
This enables or disables the Switch retransmit EAPOL PDU Request.
Max User (1-488)
Specify the maximum number of users that can be learned via 802.1X authentication.
Authentication
Failover
Specifies to Enable or Disable the Authentication Failover. When this is disabled, the
authentication will fail if the RADIUS servers are unreachable. When this is enabled, the local
database will be used to do the authentication if the RADIUS server authentication is
unreachable.
RADIUS
Authorization
Specifies to Enable or Disable RADIUS Authorization.
Click Apply to implement your configuration changes.

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English