D-Link xStack - Page 1005

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1000
Example
To delete a VLAN translation rule on ports 1 to 4:
DGS-3620-28SC:admin#delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
DGS-3620-28SC:admin#
86-10 show vlan_translation
Description
This command is used to display existing C-VLAN based VLAN translation rules.
Format
show vlan_translation {[ports <portlist> | cvid <vidlist>]}
Parameters
ports - Specifies to display the C-VLAN based VLAN translation rules of the ports.
<portlist> - Enter a range of ports to be displayed.
cvid - Specifies to display the rules for the specified CVIDs.
<vidlist> - Enter a range of VLAN IDs.
Restrictions
None.
Example
To display VLAN translation for ports 1 and 2:
DGS-3620-28SC:admin#show vlan_translation ports 1-2
Command: show vlan_translation ports 1-2
Port CVID SVID Action Priority
----- ----- ----- ------- --------
1 10 100 Add 4
1 20 100 Add 5
1 30 200 Add 6
2 10 100 Add 7
2 20 100 Add 1
Total Entries: 5
DGS-3620-28SC:admin#