D-Link xStack - Page 1041

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1036
DGS-3620-28SC:admin#config sflow counter_poller ports 1 interval 50
Command: config sflow counter_poller ports 1 interval 50
Success.
DGS-3620-28SC:admin#
92-13 delete sflow counter_poller ports
Description
This command is used to delete the sFlow counter poller.
Format
delete sflow counter_poller ports [<portlist> | all]
Parameters
<portlist> - Enter the ports to be deleted.
all - Specifies to delete all ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the sFlow counter poller for port 1:
DGS-3620-28SC:admin#delete sflow counter_poller ports 1
Command: delete sflow counter_poller ports 1
Success.
DGS-3620-28SC:admin#
92-14 show sflow counter_poller
Description
This command is used to display sFlow counter poller information for the ports that have been
created.
Format
show sflow counter_poller
Parameters
None.