xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1037
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display sFlow counter poller information for the ports that have been created:
DGS-3620-28SC:admin#show sflow counter_poller
Command: show sflow counter_poller
Port Analyzer Server ID Polling Interval (sec)
---- ------------------ -----------------------
1 1 50
Total Entries: 1
92-15 show sflow flow_sampler
Description
This command is used to display sFlow sampler information for the ports that have been created.
Format
show sflow flow_sampler
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display sFlow sampler information for the ports that have been created:
DGS-3620-28SC:admin#show sflow flow_sampler
Command: show sflow flow_sampler
Port Analyzer Configured Configured Active Active Max Header
Server ID Rx Rate Tx Rate Rx Rate Tx Rate Size
------ --------- ---------- ---------- ------- ------- -----------
1:15 1 10 10 10 10 18
1:21 1 10 10 10 10 18
Total Entries: 1
To Next Page
Loading...
Need help?
General