D-Link xStack - Page 1125

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1120
DGS-3620-28SC:admin# show super_vlan
Command: show super_vlan
Super VID : 3
VLAN Name : super3
IP Subnet: 172.6.0.254/16
Status : Inactive
Sub VID : 200-204
Total Entries: 1
DGS-3620-28SC:admin#
102-6 show sub_vlan
Description
This command is used to show sub-VLAN.
Format
show sub_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Parameters
<vlan_name 32> - (Optional) Enter the sub-VLAN name used here. This name can be up to 32
characters long.
vlanid - (Optional) Specifies the sub-VLAN ID used.
<vidlist> - Enter the sub-VLAN ID used here. This value must be between 1 and 4094.
Restrictions
None.
Example
To show all sub-VLAN: