D-Link xStack - Page 1250

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1245
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
DNS Resolver
Event description: Duplicate Domain name cache added, leads a
dynamic domain name cache be deleted
Log Message: Duplicate Domain name case name:
<domainname>, static IP: <ipaddr>, dynamic IP:<ipaddr>
Parameters description:
domainame: the domain name string.
ipaddr: IP address.
Informational
ARP
Event description: Gratuituios ARP detected duplicate IP.
Log Message: Conflict IP was detected with this device (IP:
<ipaddr>, MAC: <macaddr>, Port <[unitID:]portNum>, Interface:
<ipif_name>).
Parameters description:
ipaddr: The IP address which is duplicated with our device.
macaddr: The MAC address of the device that has duplicated IP
address as our device.
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
ipif_name: The name of the interface of the switch which has the
conflic IP address.
Warning
Telnet
Event description: Successful login through Telnet.
Log Message: Successful login through Telnet (Username:
<username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Event description: Login failed through Telnet.
Log Message:
Login failed through Telnet (Username: <username>,
IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Warning
Event description: Logout through Telnet.
Log Message: Logout through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>,
IP: <ipaddr>).
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Port
Event description: Port link up.
Log Message: Port <[unitID:]portNum> link up, <link state>
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
link state: for ex: , 100Mbps FULL duplex
Informational
Event description: Port link down.
Log Message: Port <[unitID:]portNum> link down
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
Informational