D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1246
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
802.1X
Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from
(Username: <username>, Port: <[unitID:]portNum>, MAC:
<macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of thr authenticated device.
Warning
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, Port: <[unitID:]portNum>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of the authenticated device.
Informational
RADIUS
Event description: VID assigned from RADIUS server after RADIUS
client is authenticated by RADIUS server successfully .This VID will
be assigned to the port and this port will be the VLAN untagged port
member.
Log Message: RADIUS
server <ipaddr> assigned VID :<vlanID> to
port <[unitID:]portNum> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: Ingress bandwidth assigned from RADIUS server
after RADIUS client is authenticated by RADIUS server
successfully .This Ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress
bandwith :<ingressBandwidth> to port <[unitID:]portNum>
(account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description:
Egress bandwidth assigned from RADIUS server
after RADIUS client is authenticated by RADIUS server
successfully .This egress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned egress
bandwidth :<egressBandwidth> to port <[unitID:]portNum>
(account: <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: 802.1p default priority assigned from RADIUS
server after RADIUS client is authenticated by RADIUS server
successfully. This 802.1p default priority will be assigned to the
port.
Log Message: RADIUS server <ipaddr> assigned 802.1p default
priority:<priority> to port <[unitID:]portNum> (account :
<username>)
Informational

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English