D-Link xStack - Page 1255

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1250
ipaddr: IP address of BGP peer.
Event description: BGP received unnecessary AS4-AGGREGATOR
attribute from new (4-bytes AS) BGP peer
Log Message: [BGP(11):] Received AS4-AGGREGATOR attribute
from new (4-bytes AS) peer. (Peer <ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Warning
Event description: BGP received AS_CONFED_SEQUENCE or
AS_CONFED_SET path segment type in AS4-PATH attribute.
Log Message: [BGP(12):] Received AS_CONFED_SEQUENCE or
AS_CONFED_SET path segment type in AS4-PATH attribute.
(Peer <ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Warning
Event description: BGP received invalid AS4-PATH attribute.
Log Message: [BGP(13):] Received invalid AS4-PATH attribute.
Value : <STRING> (Peer <ipaddr>).
Parameters description:
STRING: Detailed description about the invalid attribute.
ipaddr: IP address of BGP peer.
Warning
Event description: BGP received invalid AS4- AGGREGATOR
attribute.
Log Message: [BGP(14):] Received invalid AS4- AGGREGATOR
attribute. Value : <STRING> (Peer <ipaddr>).
Parameters description:
STRING: Detailed description about the invalid attribute.
ipaddr: IP address of BGP peer.
Warning
Stacking
Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Informational
Event description: Hot removal.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot removal.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Informational
Event description: Stacking topology change.
Log Message: Stacking topology is <Stack_TP_TYPE>.
Master(Unit <unitID>, MAC:<macaddr>).
Parameters description:
Stack_TP_TYPE: The stacking topology type is one of the
following:
1. Ring,
2. Chain.
unitID: Box ID.
Macaddr: MAC address.
Informational
Event description: Backup master changed to master.
Log Message: Backup master changed to master. Master (Unit:
<unitID>).
Parameters description:
unitID: Box ID.
Informational
Event description: Slave changed to master
Log Message: Slave changed to master. Master (Unit: <unitID>).
Parameters description:
unitID: Box ID.
Informational
Event description: Box ID conflict.
Log Message: Hot insert failed, box ID conflict: Unit <unitID>
Critical