D-Link xStack - Page 1254

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1249
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP connection is normally closed.
Log Message:[BGP(2):] BGP connection is normally
closed(Peer:<ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Informational
Event description: BGP connection is closed due to error (Error
Code, Error Subcode and Data fields Refer to RFC).
Log Message: [BGP(3):] BGP connection is closed due to error
(Code:<num> Subcode:<num> Field:<field> Peer:<ipaddr>).
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
field: field value when an error happen.
ipaddr: IP address of the BGP peer.
Warning
Event description: Receive a BGP notify packet with an undefined
error code or sub error code in RFC 4271.
Log Message: [BGP(4):] BGP Notify: unkown Error code(num
), Sub
Error code(num), Peer:<ipaddr>.
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Warning
Event description: Receive a BGP update packet but the next_hop
points to a local interface.
Log Message: [BGP(5):] BGP Update Attr NHop: Erroneous NHop
<ipaddr> Peer:<ipaddr>.
Parameters description:
ipaddr: IP address of BGP peer.
Warning
Event description: BGP connection is closed due to some events
happens. (Event refer to RFC)
Log Message: [BGP(6):] BGP connection is closed due to Event:
<num> (Peer:<ipaddr>).
Parameters description:
num: Event is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Warning
Event description: BGP connection is closed due to receive notify
packet. (Error Code and Error Subcode refer to RFC)
Log Message: [BGP(7):] BGP connection is closed due to Notify:
Code <num> Subcode <num> (Peer:<ipaddr>).
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Warning
Event description: The number of BGP prefix received from this
neighbor reaches the threshold.
Log Message: [BGP(8):] The number of prefix received reaches
<num>, max <limit> (Peer < ipaddr >).
Parameters description:
num: The number of prefix received.
limit: Max number of prefix allowed to receive.
ipaddr: IP address of BGP peer.
Information
Event description: The total BGP prefix number received exceeds
the limit.
Log Message: [BGP(9):] The total number of prefix received
reaches max prefix limit.
Information
Event description: BGP received unnecessary AS4-PATH attribute
from new (4-bytes AS) BGP peer
Log Message: [BGP(10):] Received AS4-PATH attribute from new
(4-bytes AS) peer. (Peer <ipaddr>).
Parameters description:
Warning