EasyManua.ls Logo

D-Link xStack - Page 1253

D-Link xStack
1284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1248
4. networkAddress(4)
5. interfaceName(5)
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Event description: Incompatible LLDP-MED TLV set detected
Log Message: Incompatible LLDP-MED TLV set detected ( on port
< portNum >, chassis id: < chassisType>, <chassisID>, port id: <
portType>, <portID>, device class: <deviceClass>)
Parameters description:
portNum: The port number.
chassisType: chassis ID subtype.
Value list:
1. chassisComponent(1)
2. interfaceAlias(2)
3. portComponent(3)
4. macAddress(4)
5. networkAddress(5)
6. interfaceName(6)
7. local(7)
chassisID: chassis ID.
portType: port ID subtype.
Value list:
1. interfaceAlias(1)
2. portComponent(2)
3. macAddress(3)
4. networkAddress(4)
5. interfaceName(5)
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Notice
Voice VLAN
Event description: When a new voice device is detected in the port.
Log Message: New voice device detected (Port <portNum>, MAC
<macaddr>)
Parameters description:
portNum : The port number.
macaddr: Voice device MAC address
Informational
Event description: When a port which is in auto Voice VLAN mode
joins the Voice VLAN
Log Message: Port < portNum > add into Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
Informational
Event description: When a port leaves the Voice VLAN and at the
same time, no voice device is detected in the aging interval for that
port, the log message will be sent.
Log Message: Port < portNum > remove from Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
Informational
DULD
Event description: A unidirectional link has been detected on this
port
Log Message: [DULD(1):] port:<[unitID:]
portNum> is unidirectional.
Parameters description:
unitID: the unit ID
portNum: port number
Informational
BGP
Event description: BGP FSM with Peer has gone to the successfully
established state.
Log Message: [BGP(1):] BGP connection is successfully
established (Peer:<ipaddr>).
Informational

Table of Contents

Other manuals for D-Link xStack

Related product manuals