xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
208
DGS-3620-28SC:admin# clear bgp all
Command: clear bgp all
Success.
13-35 clear bgp dampening
Description
This command clears the route dampening information stored in the routing table. If no parameters
are specified, the dampening information for the entire routing table will be cleared.
Format
clear bgp dampening {[<ipaddr> | <network_address>]}
Parameters
<ipaddr> - (Optional) Specifies an IPv4 address to clear the dampening information.
<network_address> - (Optional) Specifies an IPv4 network to clear the dampening information.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To clear route dampening information for network 192.168.10.0/24 and free suppressed routes:
DGS-3620-28SC:admin# clear bgp dampening 192.168.10.0/24
Command: clear bgp dampening 192.168.10.0/24
Success.
13-36 create bgp as_path access_list
Description
The command is used to create an Autonomous System path access list. You can apply an
Autonomous System path access lists to both inbound and outbound routes exchanged by a BGP
peer session.
Format
create bgp as_path access_list <list_name 16>
To Next Page
Loading...
Need help?
General