xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
209
Parameters
access_list - Specifies the AS path access list name.
<list_name 16> - Enter the AS path access list name here. This name can be up to 16
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
The following example creates an Autonomous System path access list:
DGS-3620-28SC:admin# create bgp as_path access_list test
Command: create bgp as_path access_list test
Success.
13-37 config bgp as_path access_list
Description
This command is used to configure matching rules for an Autonomous System path access list
using regular expressions.
Format
config bgp as_path access_list <list_name 16> [add | delete] <regexp_str 80> [deny | permit]
Parameters
access_list - Specifies the AS path access list name.
<list_name 16> - Enter the AS path access list name here. This name can be up to 16
add - Specifies to add a matching rule.
delete - Specifies to delete a matching rule.
<reg_express> - Regular expression that defines the as_path filter.
deny - Denies advertisement based on matching conditions.
permit - Permits advertisement based on matching conditions.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This example configures a matching rule for an AS path access list:
To Next Page
Loading...
Need help?
General