D-Link xStack - Page 267

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
262
To clear the CFM packet CCM counters:
DGS-3620-28SC:admin#clear cfm pkt_cnt ccm
Command: clear cfm pkt_cnt ccm
Success.
DGS-3620-28SC:admin#
16-27 show cfm remote_mep
Description
This command is used to display CFM remote MEP information.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
Parameters
mepname - Specify the MEP name.
<string 32> - Enter the MEP name. The maximum length is 32 characters.
md - Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name. The maximum length is 22 characters.
md_index - Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma - Specifies the maintenance association name.
<string 22> - Enter the maintenance association name. The maximum length is 22
characters.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid - Specifies the MEPID.
<int 1-8191> - Enter the MEP MEPID between 1 and 8191.
remote_mepid - Specifies the remote MEPID.
<int 1-8191> - Enter the remote MEPID between 1 and 8191.
Restrictions
None. (EI Mode Only Command)
Example
To display CFM remote MEP information:
DGS-3620-28SC:admin#show cfm remote_mep mepname mep1 remote_mepid 2
Command: show cfm remote_mep mepname mep1 remote_mepid 2
Remote MEPID : 2