D-Link xStack - Page 334

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
329
Format
debug ospf show request_list
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example
To display the current OSPF request list:
DGS-3620-28SC:admin# debug ospf show request_list
Command: debug ospf show request_list
OSPF Request List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1 IP: 1.1.1.2
LSID: 192.194.134.0 RTID: 90.2.0.1
LSID: 192.194.135.0 RTID: 90.2.0.1
LSID: 192.194.136.0 RTID: 90.2.0.1
LSID: 192.194.137.0 RTID: 90.2.0.1
LSID: 192.194.138.0 RTID: 90.2.0.1
DGS-3620-28SC:admin#
21-28 debug ospf show summary_list
Description
This command is used to display the current internal OSPF summary list.
Format
debug ospf show summary_list
Parameters
None.
Restrictions
Only Administrator level users can issue this command.