D-Link xStack - Page 359

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
354
Example
To enabled DHCPv6 client debug function:
DGS-3620-28SC:admin# debug dhcpv6_client state enable
Command: debug dhcpv6_client state enable
Success.
DGS-3620-28SC:admin#
21-58 debug dhcpv6_client state disable
Description
This command is used to disable the DHCPv6 client Debug function.
Format
debug dhcpv6_client state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disabled DHCPv6 client debug function:
DGS-3620-28SC:admin# debug dhcpv6_client state disable
Command: debug dhcpv6_client state disable
Success.
DGS-3620-28SC:admin#
21-59 debug dhcpv6_client output
Description
Used to set debug message to output to buffer or console.
Format
debug dhcpv6_client output [buffer | console]