xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
368
To display the ND Snooping binding state of entries:
DGS-3620-28SC:admin# debug show address_binding binding_state_table nd_snooping
Command: debug show address_binding binding_state_table nd_snooping
S (State) - S: Start, Q: Query, B: Bound
Time - Expiry Time (sec)
IP Address MAC Address S Time Port
--------------------------------------- ----------------- -- ---------- -----
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 S 50 5
2001::1 00-00-00-00-03-02 B 100 6
Total Entries : 2
21-79 debug show error ports box_id
Description
This command is used to show the error statistics information of the SIO ports
Format
debug show error ports box_id [<value 1-12> | all] {sio1 | sio2}
Parameters
<value 1-12> - Enter the box ID used here. This value must be between 1 and 12.
all - Specifies that all the box IDs will be used.
sio1 - Specifies that the minimum of two SIO ports will be used. SIO1 is the first stacking port.
sio2 - Specifies that the maximum of two SIO ports will be used. SIO2 is the second stacking
Restrictions
Only Administrator-level users can issue this command.
Example
To show error statistics information of the SIO port:
To Next Page
Loading...
