D-Link xStack - Page 38

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
33
3-3 create 802.1x user
Description
This command is used to create an 802.1X user.
Format
create 802.1x user <username 15>
Parameters
<username 15> - Enter to add a user name.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a user named “ctsnow”:
DGS-3620-28SC:admin#create 802.1x user ctsnow
Command: create 802.1x user ctsnow
Enter a case-sensitive new password:
Enter the new password again for confirmation:
Success.
DGS-3620-28SC:admin#
3-4 delete 802.1x user
Description
This command is used to delete a specified user.
Format
delete 802.1x user <username 15>
Parameters
<username 15> - Enter to delete a user name.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.