D-Link xStack - Page 39

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
34
Example
To delete the user named “Tiberius”:
DGS-3620-28SC:admin#delete 802.1x user Tiberius
Command: delete 802.1x user Tiberius
Success.
DGS-3620-28SC:admin#
3-5 show 802.1x user
Description
This command is used to display 802.1X local user account information.
Format
show 802.1x user
Parameters
None.
Restrictions
None.
Example
To display 802.1X user information:
DGS-3620-28SC:admin#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
--------------- ------------
ctsnow gallinari
Total Entries : 1
DGS-3620-28SC:admin#
3-6 config 802.1x auth_protocol
Description
This command is used to configure the 802.1X authentication protocol.