D-Link xStack - Page 572

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
567
DGS-3620-28SC:admin# delete ip prefix_list list_name list1
Command: delete ip prefix_list list_name list1
Success.
DGS-3620-28SC:admin#
46-4 show ip prefix_list
Description
This command is used to show an IP prefix list.
Format
show ip prefix_list {<list_name 16>}
Parameters
<list_name 16> - (Optional) Enter the prefix list name that will be displayed here. This name
must be 16 characters long.
Restrictions
None.
Example
This example shows an IP prefix list named ”list1”:
DGS-3620-28SC:admin# show ip prefix_list list1
Command: show ip prefix_list list1
IP Prefix list: list1
Description:
Total Rule Number:1
sequence 5 permit 10.0.0.0/8 le 24
DGS-3620-28SC:admin#
46-5 create ip standard access_list
Description
This command is used to create an access list used to filter routes.
Format
create ip standard access_list <list_name 16>