D-Link xStack - Page 579

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
574
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a route map named “map1” and add one sequence ID of 20 to the route map:
DGS-3620-28SC:admin# config route_map map1 add sequence 20
Command: config route_map map1 add sequence 20
Success.
DGS-3620-28SC:admin#
To configure the route map to set the metric and to set the dampening parameters:
DGS-3620-28SC:admin# config route_map map1 sequence 10 set add metric 50
Command: config route_map map1 sequence 10 set add metric 50
Success.
DGS-3620-28SC:admin# config route_map map1 sequence 10 set add dampening 15 750
2000 60 15
Command: config route_map map1 sequence 10 set add dampening 15 750 2000 60 15
Success.
DGS-3620-28SC:admin#
46-12 delete route_map
Description
This command is used to delete a route map configuration.
Format
delete route_map [map_name <map_name 16> {all_seqence} | all]
Parameters
map_name - Specifies the route map name used.
<map_name 16> - Enter the route map name used here. This name can be up to 16
characters long.
all_seqence - (Optional) Specifies that all sequence entries will be removed from the route map.
all - Specifies to delete all route maps.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.