D-Link xStack - Page 580

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
575
Example
To delete the route map named “map1”:
DGS-3620-28SC:admin# delete route_map map_name map1
Command: delete route_map map_name map1
Success.
DGS-3620-28SC:admin#
46-13 show route_map
Description
This command is used to display the route map configuration.
Format
show route_map {<map_name 16>}
Parameters
<map_name 16> - Enter the route map name used here. This name can be up to 16 characters
long.
Restrictions
None.
Example
To show the route map named “map1”:
DGS-3620-28SC:admin# show route_map map1
Command: show route_map map1
route_map : map1
--------------------------
sequence : 10 (Permit)
Match clauses:
access_list : ac_list1
Set clauses:
metric : 50
DGS-3620-28SC:admin#