xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
585
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To configure the RIPng route redistribution:
DGS-3620-28SC:admin#config ipv6route redistribute dst ripng src local metric 6
Command: config ipv6route redistribute dst ripng src local metric 6
Success.
47-13 delete ipv6route redistribute dst ripng src
Description
This command is used to remove RIPng route redistribution to stop importing routes from other
routing domain into RIPng domain.
Format
delete ipv6route redistribute dst ripng src [local | static | ospfv3]
Parameters
local - Specifies not to redistribute local routes into RIPng.
static - Specifies not to redistribute static routes into RIPng.
ospfv3 - Specifies not to redistribute OSPFv3 routes into RIPng.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To remove the RIPng route redistribution:
DGS-3620-28SC:admin#delete ipv6route redistribute dst ripng src local
Command: delete ipv6route redistribute dst ripng src local
Success.
To Next Page
Loading...
Need help?
General