D-Link xStack - Page 653

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
648
Example
To display JWAC authentication entries for ports 1 to 2:
DGS-3620-28SC:admin#show jwac auth_state ports 1-2
Command: show jwac auth_state ports 1-2
Pri:Priority. State – A:Authenticated. B:Bloacked. -:Authenticating
Time – Aging Time/Idle Time for authenticated entries.
Port MAC Address State VID Pri Time IP User Name
----- ----------------- -- ---- -- -------- ------------------- -------------
-
1 00-00-00-00-00-42 - - - 4 - -
1 00-00-12-34-56-02 - - - 21 - -
2 00-00-DF-12-E5-6A - - - 24 - -
2 00-03-38-10-28-01 - - - 13 - -
Total Authenticating Hosts : 4
Total Authenticated Hosts : 0
Total Blocked Hosts : 0
DGS-3620-28SC:admin#
51-25 show jwac update_server
Description
This command is used to display the JWAC update server.
Format
show jwac update_server
Parameters
None.
Restrictions
None.
Example
To display the JWAC update server:
DGS-3620-28SC:admin#show jwac update_server
Command: show jwac update_server
Index IP TCP/UDP Port State
----- ------------------ ------ ---- -------
1 172.18.0.0/21 TCP 1 Active
2 172.18.0.0/21 TCP 2 Active