D-Link xStack - Page 702

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
697
Unknown : True
Tagged :
Application Type : Softphone Voice
VLAN ID : 200
Priority : 7
DSCP : 5
Unknown : False
Tagged : True
Location Identification:
Location Subtype: CoordinateBased
Location Information :
Location Subtype: CivicAddress
Location Information :
Extended Power Via MDI
Power Device Type: PD Device
Power Priority : High
Power Source : From PSE
Power Request : 8 Watts
Inventory Management:
Hardware Revision :
Firmware Revision :
Software Revision :
Serial Number :
Manufacturer Name :
Model Name :
Asset ID :
DGS-3620-28SC:admin#
57-17 show lldp local_ports
Description
This command is used to display the per-port information currently available for populating
outbound LLDP advertisements.
Format
show lldp local ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specify the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.
mode - (Optional) Select the mode: brief, normal, or detailed.
brief - Specifies to display the information in brief mode.
normal - Specifies to display the information in normal mode. This is the default display mode.
detailed - Specifies to display the information in detailed mode.