D-Link xStack - Page 727

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
722
Parameters
guest_vlan - Specifies the name of the guest VLAN.
<vlan_name 32> - Enter the name of the guest VLAN. The guest VLAN name can be up to 32
characters long.
guest_vlanid - Specifies the VLAN ID of the guest VLAN.
<vlanid 1-4094> - Enter the VLAN ID of the guest VLAN. The guest VLAN ID must be
between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a MAC-based access control guest VLAN:
DGS-3620-28SC:admin#create mac_based_access_control guest_vlan default
Command: create mac_based_access_control guest_vlan default
Success.
DGS-3620-28SC:admin#
61-8 delete mac_based_access_control
Description
This command is used to delete MAC-based access control guest VLANs.
Format
delete mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid < vlanid 1-
4094>]
Parameters
guest_vlan - Specifies the name of the guest VLAN.
<vlan_name 32> - Enter the name of the guest VLAN. The guest VLAN name can be up to 32
characters long.
guest_vlanid - Specifies the VLAN ID of the guest VLAN.
<vlanid 1-4094> - Enter the VLAN ID of the guest VLAN. The guest VLAN ID must be
between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a MAC-based access control guest VLAN:
DGS-3620-28SC:admin#delete mac_based_access_control guest_vlan default
Command: delete mac_based_access_control guest_vlan default