D-Link xStack - Page 732

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
727
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a MAC-based access control local by MAC address:
DGS-3620-28SC:admin#delete mac_based_access_control_local mac 00-00-00-00-00-01
Command: delete mac_based_access_control_local mac 00-00-00-00-00-01
Success.
DGS-3620-28SC:admin#
To delete a MAC-based access control local by VLAN name:
DGS-3620-28SC:admin#delete mac_based_access_control_local vlan default
Command: delete mac_based_access_control_local vlan default
Success.
DGS-3620-28SC:admin#
61-15 show mac_based_access_control auth_state ports
Description
This command is used to display MAC-based access control authentication MAC information.
Format
show mac_based_access_control auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the ports to display.
Restrictions
None.
Example
To display MAC-based access control authentication MAC information: