D-Link xStack - Page 733

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
728
DGS-3620-28SC:admin# show mac_based_access_control auth_state ports
Command: show mac_based_access_control auth_state ports
(P): Port-based Prio: Priority
Port MAC Address Original State VID Prio Aging Time/
RX VID Block Time
------ -------------------- ---- -------------- ---- ---- -----------
1 00-00-00-00-00-01 1 Authenticated - 6 1439
1 00-00-12-00-03-00 1 Blocked - - 286
3 00-00-00-00-00-02(P) 1 Authenticated - 6 1440
Total Authenticating Hosts : 0
Total Authenticated Hosts : 2
Total Blocked Hosts : 1
DGS-3620-28SC:admin#
61-16 show mac_based_access_control
Description
This command is used to display MAC-based access control information.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports - (Optional) Specify to display the MAC-based access control port state.
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display MAC-based access control information:
DGS-3620-28SC:admin#show mac_based_access_control
Command: show mac_based_access_control
MAC-based Access Control
------------------------------------
State : Disabled
Method : Local
Password Type : Manual String
Password : default
Max User : No Limit