D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
751
Format
config mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>
[add | delete] <portlist>
Parameters
vlan - Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list.
<ipv6addr> - Enter the multicast group IPv6 address.
add - Specifies to add the member ports.
delete - Specifies to delete the member ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add ports 9 to 10 from MLD Snooping static member ports for group FF1E::1 on default VLAN:
DGS-3620-28SC:admin#config mld_snooping static_group vlan default FF1E::1
delete 9-10
Command: config mld_snooping static_group vlan default FF1E::1 delete 9-10
Success.
DGS-3620-28SC:admin#
65-6 delete mld_snooping static_group
Description
This command is used to delete an MLD snooping static group on the switch. The deletion of an
MLD snooping static group will not affect the MLD snooping dynamic member ports for a group.
Format
delete mld_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>
Parameters
vlan - Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list.
<ipv6addr> - Enter the multicast group IPv6 address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English