xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
776
===============================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
-------------------------------------------------------------------------------
67-2 show greeting_message
Description
This command is used to display the currently configured greeting message on the switch.
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display the currently configured greeting message:
To Next Page
Loading...
Need help?
General