D-Link xStack - Page 821

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
816
Example
To display the method to save log:
DGS-3620-28SC:admin#show log_save_timing
Command: show log_save_timing
Saving Log Method: On_demand
DGS-3620-28SC:admin#
71-10 show log_software_module
Description
This command is used to display the protocols or applications that support the enhanced log.
Format
show log_software_module
Parameters
None.
Restrictions
None.
Example
To display the the protocols or applications that support the enhanced log:
DGS-3620-28SC:admin#show log_software_module
Command: show log_software_module
CFM_EXT DHCPv6_CLIENT DHCPv6_RELAY DHCPv6_SERVER
ERPS ERROR_LOG MSTP OSPFV2
VRRP
DGS-3620-28SC:admin#
71-11 config log_save_timing
Description
This command is used to set the method to save log.
Format
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]