D-Link xStack - Page 841

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
836
72-3 clear ethernet_oam ports
Description
This command is used to clear Ethernet OAM information.
Format
clear ethernet_oam ports [<portlist> | all] [event_log | statistics]
Parameters
<portlist> - Enter a range of Ethernet OAM ports to be cleared.
all - Specifies to clear all Ethernet OAM ports.
event_log - Specifies to clear Ethernet OAM event log information.
statistics - Specifies to clear Ethernet OAM statistics.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear port 1 OAM statistics:
DGS-3620-28SC:admin#clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DGS-3620-28SC:admin#
To clear port 1 OAM events:
DGS-3620-28SC:admin#clear ethernet_oam ports 1 event_log
Command: clear ethernet_oam ports 1 event_log
Success.
DGS-3620-28SC:admin#