D-Link xStack - Page 865

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
860
Example
To enable OSPFv3:
DGS-3620-28SC:admin# enable ospfv3
Command: enable ospfv3
Success.
DGS-3620-28SC:admin#
74-2 disable ospfv3
Description
This command is used to disable OSPFv3 on the Switch.
Format
disable ospfv3
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To disable OSPFv3:
DGS-3620-28SC:admin# disable ospfv3
Command: disable ospfv3
Success.
DGS-3620-28SC:admin#
74-3 show ospfv3
Description
This command is used to display the OSPFv3 configurations or OSPFv3 interfaces information.
Format
show ospfv3 {[ipif <ipif_name 12> | all]}