D-Link xStack - Page 875

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
870
intra_area_prefix - Specifies that the Intra-Area-Prefix LSA will be displayed.
Restrictions
None. (EI Mode Only Command)
Example
To display OSPFv3 Link-State Database:
DGS-3620-28SC:admin# show ospfv3 lsdb
Command: show ospfv3 lsdb
Router LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Link
0.0.0.0 2.2.2.2 696 0x80000003 0
Link LSA (Interface System)
Link State ID ADV Router Age Seq# Prefix
0.0.0.1 2.2.2.2 696 0x80000003 1
Intra-Area-Prefix LSA (Area 0.0.0.0)
Link State ID ADV Router Age Seq# Ref LSA Type
0.0.0.1 2.2.2.2 684 0x80000004 0x2001
Total Entries: 3
DGS-3620-28SC:admin# show ospfv3 lsdb type rtrlink
Command: show ospfv3 lsdb type rtrlink
LS Age: 782
LS Type: Router-LSA
Link State ID: 0.0.0.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000003
Checksum: 0xED3A
Length: 24
Flags: 0x0: - - - -
Options: 0x13: - R - - E V6
Total Entries: 1
DGS-3620-28SC:admin#
74-14 show ospfv3 neighbor
Description
This command is used to display OSPFv3 neighbor information.
Format
show ospfv3 neighbor {<neighbor_id> ipif <ipif_name 12>}