D-Link xStack - Page 903

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
898
Example
To create a static RP:
DGS-3620-28SC:admin# create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Command: create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Success.
DGS-3620-28SC:admin#
77-15 delete pim static_rp group
Description
This command is used to delete a static RP.
Format
delete pim static_rp group <network_address>
Parameters
group - Specifies the multicast group address that will removed from the static RP.
<network_address> - Enter the multicast group address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a static RP:
DGS-3620-28SC:admin# delete pim static_rp group 224.1.2.0/24
Command: delete pim static_rp group 224.1.2.0/24
Success.
DGS-3620-28SC:admin#
77-16 show pim static_rp
Description
This command is used to list all the static RP settings.
Format
show pim static_rp