D-Link xStack - Page 906

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
901
77-19 delete pim register_checksum_include_data rp_address
Description
This command is used to delete the register checksum including the data for the specific RP
address.
Format
delete pim register_checksum_include_data rp_address <ipaddr>
Parameters
rp_address - Specifies the RP address that will be removed from the checksum, including the
data portion list.
<ipaddr> - Enter the RP address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the register checksum including the data for the specific RP address:
DGS-3620-28SC:admin# delete pim register_checksum_include_data rp_address
10.54.71.9
Command: delete pim register_checksum_include_data rp_address 10.54.71.9
Success.
DGS-3620-28SC:admin#
77-20 show pim register_checksum_include_data_rp_list
Description
This command is used to list all the RPs of the registered checksum, including the data.
Format
show pim register_checksum_include_data_rp_list
Parameters
None.
Restrictions
None.