D-Link xStack - Page 917

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
912
DGS-3620-28SC:admin#
78-8 enable pim6
Description
This command is used to enable the PIM global state for IPv6 network.
Format
enable pim6
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To enable PIM global state for IPv6 network:
DGS-3620-28SC:admin# enable pim6
Command: enable pim6
Success.
DGS-3620-28SC:admin#
78-9 disable pim6
Description
This command is used to disable the PIM global state for IPv6 network.
Format
disable pim6
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)