D-Link xStack - Page 924

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
919
Success.
DGS-3620-28SC:admin#
78-16 show pim6 crp
Description
This command is used to list all candidate rendezvous point (RP) related information.
Format
show pim6 crp
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To show the C-RP information:
DGS-3620-28SC:admin# show pim6 crp
Command: show pim6 crp
PIM6 Candidate-RP Table
Group Interface Priority Interval
------------------ ------------- --------- ---------
FF1E:90::/64 System 192 150
Total Entries: 1
DGS-3620-28SC:admin#
78-17 show pim6 static_rp
Description
This command is used to list all static RP settings.
Format
show pim6 static_rp
Parameters
None.