S0602170K
Page 9
Axle (ZF AP 420R)
LIST OF LUBRICANTS TE-ML 05
NOTE:
Axles for cars, commercial vehicles and off-road vehicles.
When using multigrade gear oils, the base oil must not contain more than 2% by weight of dissolved
additives (VI improver, pour point depressant etc.) in addition to EP additives.
At greasing points, use a multipurpose grease with the following properties:
Lithium soap, drop point above 170°C (338°F), NLGI Class 2.
The grease must be anti-corrosive, water-resistant and walk stable.
Note to lubricant suppliers: Please inform ZF immediately of any changes to the composition of trade
names of approved products, and of differences between Germany and other countries.
Axles Approved Lubricants
Axles and axle-center reduction gears.
Wheel hubs and half-shafts.
Axle differentials.
Gear oils with or without limited-slip additives.
API GL-5
MIL-L 2105 D
SAE 80 W-90
SAE 85 W--90
SAE 85 W-140
SAE 90
For commercial products see A12 and A13
Axles and axle-center reduction gears with multidisc
limited-slip differentials.
Gear oils with or without limited-slip additives.
API GL-5
MIL-L 2105 D
SAE 80 W-90
SAE 85 W-90
SAE 85 W-140
SAE 90
For commercial products see A12 and A13
Axles and axle-center reduction gears with wet
multidisc brakes.
Gear oils with limited-slip additives.
API GL-5
MIL-L 2105 D
SAE 80 W-90
SAE 85 W-90
SAE 85 W-140
SAE 90
To Next Page
Loading...
