S0607080K
Page 34
Transmission and Torque Converter
(ZF 4WG-310)
DOWNSHIFT
Overview
1. There are two downshift switches down
Figure 30, and it is possible for operators
to select one of them according to the
condition.
2. If the downshift switch is depressed during
the machine moving, downshifting takes
place automatically. As a result, fast
digging and moving is possible. But at the
manual mode the kick-down can only be
activated.
3. If a change or traveling direction takes
place or the downshift switch is depressed
a second time, downshifting is released
automatically.
Kick-down: Forward Second Gear to Forward First Gear
(Auto Selector Switch "O" - Manual Mode)
AJS0400L
Figure 30
AHS0220L
Figure 31
To Next Page
Loading...