S0309000
Page 7
Standard Torques
Return to Master Table of Contents
TORQUE VALUES FOR HOSE CLAMPS
The following chart provides the tightening torques for hose clamps used in all rubber applications
(radiator, air cleaner, operating lever boots, hydraulic system, etc.).
CLAMP TYPE AND SIZE
TORQUE ±5 in lb (0.1 kg•m)
RADIATOR, AIR CLEANER,
BOOTS, ETC.
HYDRAULIC SYSTEM
KILOGRAM
METER
(kg•m)
INCH POUNDS
(in lb)
KILOGRAM
METER
(kg•m)
INCH POUNDS
(in lb)
"T" Bolt (Any Diameter)
Worm Drive - 1-3/4 in
Open Diameter and Under
Worm Drive - Over 1-3/4 in
Open Diameter
Worm Drive - All "Ultra-
Tite"
0.6 - 0.7
0.2 - 0.3
0.5 - 0.6
1.1 - 1.2
55 - 65
20 - 30
40 - 50
95 - 105
-------
0.5 - 0.6
-------
0.5 - 0.6
------
40 - 50
------
40 - 50
To Next Page
Loading...
