S0607080K
Page 37
Transmission and Torque Converter
(ZF 4WG-310)
When either downshift (Figure 30) is depressed a second time, the transmission pulse signal of the "22" is
interrupted and the transmission returns to normal operation.
NOTE:
The fourth to the third gear changes without any rpm change when the downshift switch is
pressed.
NOTE:
The third to the second gear, and the third to the first gear, changes occur when the rpm is
reduced 200 - 300 rpm from current setting.
Automatic
Gear Selection
Downshift Switch "Activated"
Fourth Gear Downshift to Third Gear
Third Gear Downshift to Second Gear
Second Gear Downshift to First Gear
First Gear Remains in First Gear
To Next Page
Loading...
